| T Bolt Clamps | |||
| 1. General Brief Specification | 2. Illustrations | 3. Identification Code Nos | 3. Ordering Information |
T-Bolt General Specification
The construction of the Jupiter T-Bolt Clamp comprises of hard Stainless Steel band assembled with forged T-Bolt duly heat-treated and Zinc plated, locked in a T-guide with self-locking nut at the end.
 |
 |
 |
 |
 |
||||||||
| Clamping Dia | Band Width (mm) b |
T-Bolt | Nut Hex Size (A/F) (mm) F |
Recommended Installation Torque (Nm/Ib-inch)** T |
||||||||
| Nominal Hose O.D. DN |
Max Supply Dia D1 |
Min D2 |
Thd.Dia d |
Length (mm) L |
||||||||
| 14.0 | 19.5 | b=14.0 | b=19.5 | b=14.0 | b=19.5 | b=14.0 | b=19.5 | b=14.0 | b=19.5 | |||
| 36 - 48 |
DN + 1 | Dn - 2 |  |
- | M5 | - | 40 | - | 8.0 | - | 5.65/50 | - |
| 50 64 |
DN + 1 | DN - 5 | |
|
M5 | 1/4 UNF | 65 | 67 | 8.0 | 11.1 | 5.65/50 | 5.65/50 |
| 66 - - - 100 |
DN + 2 | DN - 5 | |
|
M5 | 1/4 UNF | 65 | 73 | 8.0 | 11.1 | 5.65/50 | 8.5/75 |
| 102 - - - 300 and above |
DN + 2 | DN - 6 | - | |
- | 1/4 UNF | - | 73 | - | 11.1 | - | 8.5/75 |
Note -
The term "Size No."and corresponding actual diameters of type "TB or SLTB" etc. from SAE J 1508 are confusive to the customers and are omitted here. Due to limited clamping range reference to exact hose O.D. i.e. DN is more convenient and preferred.
These figs. are referred from SAE J 1508. Jupiter is tested for values in excess of the same.
Clamps with band thickness from 0.6 upto 2 mm, width form 14 upto 31.75 mm and bolts dia upto 7/16" etc. are available for special applications. For A.U. application, specific drawing are prepared and forwarded.
Manufacturers & Exporters of Clamps
Address +
W-347, TTC Industrial Area, MIDC, Rabale, Navi Mumbai. 400701. INDIA., Maharashtra, India
Tel +
+91 8691004957
022-25332184 / 25362525 / 25368577/ 8691004957